Question: How do I find out my modem configuration information?
Step 1: Go to the Modem settings in Control Panel. Go to the Start button -> Settings -> Control Panel -> Modems.
Step 2: Find the Port Information for the modem. Note the name of the modem installed in Windows. Go to the Diagnostics Tab (located towards the top of the Modem Properties box).
Under the Diagnostics menu, highlight the Com port that modem is listed under, and Click on the "More Info…" button.
Windows should show a message, "Communicating with Modem. This may take a few minutes.", and then the More Info… window should appear. At the Top of the window, is Port Information.
Note the Com port, Interrupt, Address, and UART.
At this point, you should have written down, the Type of modem installed, the Com port, Interrupt (IRQ), Address (or Base Address), and UART.
To Exit, Click on the "OK" button, and then Cancel out of Modem Properties.
TO THE CUSTOMER:
We at Norton-Lambert greatly value the opinions of you, the Close-Up customer. If you have any suggestions for the improvement of this document, do not hesitate to contact us via E-Mail at the following E-Mail address:
techsupport@norton-lambert.com
Additionally, if you find any errors in this document, please let us know so we can continue to provide the best possible support to our valued customers.
Back to Main FAQ page