Netgear™ Router One incoming iClose-Up connection

 

 

To have one iClose-Up Server behind the Router you must forward the port 2338 (this is the port iClose-Up uses) to the IP address of the iClose-Up computer you want to be able to receive incoming connections (the iClose-Up Server).  To do this…

 

 

1.       Open your web browser (on a PC behind your router) and enter the address 192.168.0.1 and press Enter.

2.       Enter the router Administrator User Name (default is “admin”) and Password (default is “1234”) then click OK.

3.       Click the Advanced link.

4.       Click the Ports link.

5.       On the second line enter the port number 2338

6.       On the same line enter the last part of the IP address for the iClose-Up computer you want to be able to receive incoming iClose-Up connections.  Go to the iClose-Up computer that you want to be able to receive incoming connections and find and write down the IP address.  If you do not know how to find an IP address of a computer see How to Find IP Addresses.  If for example the four part IP address on the iClose-Up computer turns out to be 192.168.0.2 then you would enter the last part of the IP address which is 2.  Therefore in our example port 2338 will be associated with IP address 192.168.0.2.

7.       Select the Apply button then close the web browser.

 

 

We must now make the final setting adjustment to iClose-Up to allow use of the router.

 

1.       On the iClose-Up machine using the router double click on the red iClose-Up triangles in the lower right of the screen.

2.       Click the Options button.

3.       Click the Proxy tab.

4.       Check the box on the line ‘Internet Connection Sharing/Proxy Servers/ Routers’.

5.       Click the OK button then restart the computer.  You are done.